Frigidaire Gallery Ice Maker Not Working: 11 Fixes

Frigidaire Gallery Ice Maker Not Working: 11 Fixes

What should you do if the water is flowing through your Frigidaire’s ice maker but the ice maker is not? Initially, try these fixes.

  1. Ice Maker Control Arm Off
  2. Frigidaire Refrigerator Water Inlet Valve
  3. Freezer Temperature is above 10 Degrees F (-12 C)
  4. Reset the Ice Maker
  5. Faulty Door Seal
  6. The Refrigerator Water Filter Clogged
  7. Refrigerator Water Line Frozen
  8. Unjam the Ice Tray
  9. Replace the Water Filter
  10. The Icemaker is Not Level
  11. Ice Stuck in the Mold

You anticipate finding ice when you go to your freezer, whether you want to sip on a cool glass of iced tea on a hot summer day or put crushed ice in your margarita. One of the greatest conveniences of modern life is having ice; however, when it breaks, it is a hassle.

If the water supply line to a Frigidaire ice maker is blocked or kinked, the ice maker won’t function. Make the supply line straight. If the line is frozen, you will need to defrost it by unplugging the refrigerator for a few hours or using a hairdryer to quickly warm and melt the ice.

A broken ice maker is an urgent problem as the hot summer days draw near. This Frigidaire refrigerator ice maker troubleshooting guide was created to assist you in quickly identifying the issue.

Ice Maker Control Arm Off

The control arm should be checked first if you discover that your ice maker isn’t functioning but the water is. This component controls the switch that turns the ice maker in your refrigerator on or off.

Moving food around in your freezer has the tendency to knock the control arm to the on or off position. If your Frigidaire ice maker isn’t cycling, that’s a surefire sign the problem is with the arm. Simply switch the arm to the ON position and wait to see if this resolves your ice maker issues.

Frigidaire Gallery Ice Maker Not Working: 11 Fixes

Perform a complete reset of the Frigidaire ice maker to make sure the control arm is the issue. Your ice maker can be hard reset using the control panel, depending on the model. When the LED turns red, keep holding down the on/off button. Hold the same button down until it turns green after a brief delay.

Frigidaire Refrigerator Water Inlet Valve

The ice maker and dispenser receive water through an electrically controlled valve called the water inlet valve. The water inlet valve won’t permit water to flow through if it is broken or if there is not enough pressure. The ice maker won’t produce any ice as a result. At least 20 psi are necessary for the valve to operate properly.

A minimum of 20 psi water pressure should be present at the valve. If the water pressure is adequate, check the water inlet valve’s power with a multimeter. Replace the water inlet valve if the ice maker will not produce ice despite having sufficient pressure and power.

Freezer Temperature is above 10 Degrees F (-12 C)

Your thermostat may be set incorrectly, which could be one issue you encounter. Whether you use a dial or a digital display to regulate the temperature in your refrigerator, if it is not set properly, you run the risk of breaking your ice maker.

Your fridge-freezer unit’s single temperature dial is likely to be the problem if it has just one. Even though the two separate dials are not very common, you should still turn each one down a few notches if you have them.

Find your fridge thermostat and adjust the temperature accordingly. If your ice is soft, lower the freezer’s temperature to make it colder. Set your ice just a little warmer if it’s frosty or stubbornly resists melting.

Reset the Ice Maker

One of the first diagnostic procedures for any device that might resolve a problem is to press the power button. Simply restarting the machine whenever you get stuck might be helpful. The reset button on the majority of contemporary appliances returns the device to its factory settings.

Frigidaire Gallery Ice Maker Not Working: 11 Fixes

If your ice maker is not making ice, you should first try to reset it. For this to function on the majority of models, the icemaker must be turned off and then back on. Additionally, you should make sure the power source is operational. When there is a power outage, some refrigerators have a safety switch that turns off the ice maker.

It is simple and quick to reset the ice maker. In some cases, a screwdriver may be needed, and it is done at the back of the refrigerator. The ice maker can be reset so that it returns to its factory default settings and begins making ice once more. Setting your ice maker back to default settings should solve any issues and prompt the production of ice to start again right away if you think it may have become confused or if a minor electrical issue has prevented it from producing ice.

Faulty Door Seal

A bad door seal is yet another potential cause of the temperature’s unpredictability. Temperatures become unstable when warm air seeps into the fresh food door because of a poor seal.

The controller keeps the compressor running longer to maintain the ideal 37 degrees for fresh food when the temperature sensor detects warmer air. This excessive cooling causes the freezer temperature to fall well below zero, which will freeze the tip of the water tube that provides the ice maker with water.

Remember that the doors must be self-closing for proper door suction and sealing so that their own weight assists in maintaining the seal. To tilt the refrigerator back slightly, the leveling legs or rollers must be adjusted. Once the seal is complete, the defrost cycles will thaw the water tube and begin the process of making ice within 24 hours.

The Refrigerator Water Filter Clogged

A clogged water filter may be the cause of your ice maker’s insufficient or small ice production. Water passes through the filter to remove any impurities before going to the ice maker or water dispenser. Over time, the filter will fill to capacity and clog, reducing water flow.

Fortunately, changing the water filter is an easy way to solve this. Look in the owner’s manual or search online for your Frigidaire model to learn where the filter is located for your particular model.

Tip: To ensure that your water is always clean and fresh, change the water filter in your refrigerator every six months. If your ice tastes bad, that’s a good sign it needs to be replaced!

Frigidaire Gallery Ice Maker Not Working: 11 Fixes

Refrigerator Water Line Frozen

Frozen water clogging the supply line can occasionally be the cause of a Frigidaire refrigerator’s ice maker failing to produce ice. Your refrigerator’s ability to receive water will be severely limited or impossible.

Move the refrigerator to check behind it for the supply line in order to check it yourself. Turn off the water supply and unplug the device. There are several ways to defrost the line.

The refrigerator can defrost for a few hours if you have some free time. Apply a hairdryer to the line for more rapid results. It might be time to call in a professional if your Frigidaire refrigerator’s ice maker continues to malfunction.

Unjam the Ice Tray

It’s common for ice cubes to stick together because ice has a mind of its own. But if your manual ice tray has never let you down before, it might be because you haven’t cleaned it since you last used it. If your ice refuses to release from the tray after freezing, try heating the tray; some trays heat up during this freezing process, which helps to release the ice.

To unstick your ice tray, follow these simple steps. First, run the hot water tap to warm up the kitchen sink. The ice maker tray should now contain a cup of hot water. By doing this, you can melt any ice that is already there as well as anything else that might be sticking to the ice. Check to see that there are no more chips in the ice tray before the next batch starts to fill the ice maker.

Replace the Water Filter

Water filters in refrigerators should be changed every six months. The more often you use your refrigerator water filter, the more bacteria and minerals it gathers, which results in less thoroughly filtered water. The most crucial component of your refrigerator, the water, will remain as clean as possible if you change the water filter every six months (or as soon as you notice a decrease in water flow). By doing this, you will prevent mineral buildup.

Frigidaire Gallery Ice Maker Not Working: 11 Fixes

You should anticipate a break in the water line and a reduction in ice production when the water filter begins to clog. Even though it does occasionally happen, all it should take is a quick replacement of your water filter to put things right. Once everything is functioning properly, you can also reset the ice maker and the filter light.

The Icemaker is Not Level

Your ice maker might not be level if your refrigerator isn’t level. Your refrigerator’s placement could affect how the ejector assembly operates, which could result in crushed ice instead of nice, fluffy cubes. Verify that the floor of the freezer and the refrigerator is at an equal height to avoid this problem.

Check that the refrigerator is actually level by inserting a level into the bottom of the refrigerator and freezer. Make necessary adjustments to the refrigerator’s feet to make it level. The ice maker itself must then be modified accordingly.

Ice Stuck in the Mold

The production of fractured, fluffily frosted, and misshapen ice is a common problem with ice makers. When a large batch of ice jams up in the molds, this occurs. If this occurs, no new ice can be made, and because the water line cannot fill the tray, it may also become clogged.

To ensure that your refrigerator maintains consistently clear ice, simply remove any stuck ice from your ice maker with a pitcher of warm water before turning the appliance back on. Avoid wasting money on pricey chemicals by simply running a pitcher of water over the hook assembly until the water is clear. You can resume making ice the way you normally do once the bin is empty.

Conclusion: Fix Frigidaire Gallery Ice Maker Not Working

Keep your composure if the water dispenser on your Frigidaire refrigerator continues to function (or does so slowly) despite the ice maker not producing ice any longer. This is a typical issue.

If your Frigidaire ice maker isn’t functioning properly, check to see if the signal arm is turned on and if any ice is blocking the chute entrance. Check the ice maker’s interior on a regular basis to make sure the auger is spinning freely and isn’t clogged with ice.

Read More: How to Defrost the Samsung Ice Maker?

Leave a Reply

Your email address will not be published.